News & Insights | IDENTEC SOLUTIONS

Underground Mine Fire: Risks, Prevention and Emergency Response

Written by Mark Buzinkay | 16 November, 2026

Table of contents: 

 

Why Is an Underground Mine Fire Particularly Dangerous?

An underground mine fire represents one of the most serious emergency scenarios in mining operations. Unlike a surface fire, where smoke and heat can often disperse into the atmosphere, underground fires develop within confined networks of tunnels, shafts, ramps, and working areas. These conditions create additional hazards that can threaten workers far from the original fire.

The immediate danger is not necessarily the flames themselves. Smoke and toxic combustion products, particularly carbon monoxide (CO), can spread through the mine’s ventilation network and reach areas that are otherwise unaffected by the fire. Carbon monoxide is especially dangerous because it is colourless and odourless, and exposure can cause unconsciousness or death.

Smoke also reduces visibility, complicating evacuation and increasing disorientation risk. Workers may have to travel considerable distances to reach a safe exit or refuge chamber, sometimes through areas where environmental conditions are deteriorating.Ventilation systems introduce another challenge. While essential for supplying fresh air and removing contaminants during normal operations, ventilation airflow can transport smoke and toxic gases into occupied areas during a fire. Changes in temperature, air pressure, and airflow resistance may alter ventilation patterns, potentially affecting routes previously considered safe.

An underground fire can also damage electrical installations, communication equipment and ventilation infrastructure. Critical system failures may significantly complicate emergency response.

For Health, Safety and Environment (HSE) managers, this means that underground fire safety cannot be limited to preventing ignition or installing firefighting equipment. It requires understanding how a fire might develop, which areas could become hazardous, how workers can reach safety and how emergency coordinators can account for everyone underground.

The central challenge is therefore not only controlling the fire, but protecting personnel throughout the entire mine. (1)  

 

 

 

 

What Are the Most Common Causes of Underground Mine Fires?

Underground mines contain numerous potential ignition sources, ranging from mobile mining equipment to fixed electrical installations. Understanding these sources is essential for developing effective fire prevention measures.

Mobile equipment poses a significant fire risk. Diesel-powered haul trucks, loaders, drilling machines and personnel carriers operate under demanding conditions involving high temperatures, mechanical stress and continuous vibration. Hydraulic fluid leaks, damaged fuel lines, electrical faults and contact between combustible materials and hot surfaces can all contribute to equipment fires.

The location of mobile equipment matters. For example, a vehicle fire on a main access ramp may compromise an evacuation route or affect ventilation airflow to multiple working areas.

Fixed infrastructure presents additional hazards. Electrical substations, conveyor installations, maintenance workshops, fuel storage facilities, and other underground installations contain equipment and materials that can sustain fires. Electrical failures, overheated components, and accumulated combustible materials can increase ignition risk.

Operational activities introduce further risks. Welding, cutting, grinding and other hot work can generate sparks or high temperatures. Inadequate housekeeping, insufficient maintenance, or ineffective permit-to-work procedures can increase fire risk. Fire risk depends not only on the likelihood of ignition but also on its potential consequences. A relatively small fire near a critical ventilation installation or major evacuation route may create a greater threat than a larger fire in an isolated location.

Consequently, HSE managers should assess fire hazards based on location, potential severity, personnel exposure, and possible impacts on essential mine infrastructure. Regular inspections, preventive maintenance, fire detection, suitable suppression systems, and effective hot-work controls are fundamental to reducing these risks. (2)  

Learn more about operations and mining safety training

 

How Can Underground Mines Assess and Reduce Fire Risks?

Effective underground fire prevention begins with a systematic Fire Risk Analysis (FRA). It identifies credible fire scenarios, assesses their likelihood and consequences, and determines which preventive and protective measures are necessary.

A comprehensive FRA considers both mobile and fixed fire sources. Evaluate each source based on its combustible load, potential heat release, proximity to workers, location within the ventilation network, and possible impact on critical infrastructure.

The location of a potential fire is particularly important. A vehicle fire near an exhaust airway may have different consequences from an identical fire near a fresh-air intake, refuge chamber or main access ramp.

Several established risk assessment methods can support this process.

The Gustav Purt method provides an initial indication of fire protection requirements based on a facility's characteristics and combustible contents. Although originally developed for buildings, it can be adapted to certain underground fixed installations. Its results require further engineering assessment because it does not specify the exact protection equipment or design required.

Bowtie analysis offers a complementary approach. It links potential fire causes to preventive barriers, consequences, and mitigation measures. For example, preventive barriers for a vehicle fire may include regular maintenance, hydraulic hose inspections and automatic fire suppression. Mitigation measures may include emergency alarms, evacuation procedures and refuge facilities.

An important feature of Bowtie analysis is its consideration of barrier failure. A fire suppression system may be installed but ineffective because of inadequate maintenance, damaged components or incorrect activation.

The practical value of FRA becomes clear when its findings guide investments and operating procedures. Mines can prioritise high-consequence scenarios, improve detection and suppression, relocate combustible materials, or strengthen protection for critical infrastructure.

Fire risk assessments must also remain current. Underground mines change continuously as new workings develop, equipment relocates, and ventilation configurations change. These changes can create new hazards or invalidate assumptions used in earlier assessments.

The objective is not simply to document risks but to establish a continuously reviewed system of prevention and protection. (1)  

 

How Do Ventilation and Smoke Propagation Affect Fire Safety?

Ventilation is fundamental to safety in underground mining. It supplies fresh air, dilutes contaminants and removes heat generated by equipment and mining activities. During a fire, however, the ventilation network can also become the main pathway for smoke and toxic combustion products to spread. The consequences depend on the fire location, ventilation configuration, airflow quantities, fire intensity, and the incident's development.

How do smoke and toxic gases spread underground?

When a fire develops, combustion generates heat, smoke and gases that enter surrounding airways. Ventilation airflow may carry these contaminants through interconnected tunnels and working areas. Heat can also change airflow behaviour. Depending on the ventilation configuration and fire conditions, thermal effects may influence pressure differences and change airflow quantities, or even reverse flow. As a result, areas safe during normal operation may become hazardous during an emergency. This makes it essential to understand how potential fire locations relate to the ventilation network.

How can fire simulations improve emergency planning?

Fire simulations use mathematical models to estimate how heat, smoke, gases and ventilation conditions may develop over time.

The Chuquicamata underground mine study in Chile illustrates how simulation results can support emergency planning. Researchers combined fire risk assessment with ventilation modelling to identify areas potentially affected by different fire scenarios. The researchers organised the results into matrices showing relationships among fire locations, affected facilities, and possible mitigation measures.

Such analyses can help emergency planners identify potentially contaminated zones, evaluate ventilation control strategies and assess the suitability of evacuation routes. However, simulations are planning tools, not guarantees of actual conditions. Their usefulness depends on accurate ventilation data, credible fire assumptions and regular validation against mine conditions.

What happens when ventilation systems fail?

A particularly serious scenario occurs when fire damages electrical cables or ventilation equipment. For example, losing a main fan may shift airflow distribution and allow contaminants to reach areas that wouldn't be affected under normal operating conditions.

The Chuquicamata study therefore considered electrical blackout scenarios alongside simulations of normal ventilation operation. HSE managers should ensure that emergency plans address the loss of critical ventilation components and the possibility that planned mitigation measures cannot be activated. Decisions about changing fan operation or ventilation controls during an incident must follow site-specific, engineered emergency procedures. Improvised changes can worsen smoke exposure. (3)  

 

How Should Underground Mines Prepare for Fire Evacuation?

A successful underground fire evacuation depends on decisions made long before an emergency occurs. Evacuation procedures must reflect realistic fire scenarios, mine geometry, ventilation behaviour, personnel distribution and the availability of emergency infrastructure. Simply directing everyone toward the nearest exit may not be sufficient. Smoke can contaminate an evacuation route or make it inaccessible because of the fire itself.

How can scenario-based evacuation plans reduce risks?

Scenario-based planning considers how different fire locations may affect underground working areas and escape routes. At Chuquicamata, researchers developed matrices that identify which facilities smoke and gases could affect under different fire scenarios. The analysis considered normal ventilation conditions, mitigation measures and electrical blackouts. This approach enables emergency planners to identify suitable evacuation routes and refuge options for different situations. One important recommendation from the study is to establish common evacuation routes wherever possible. Workers facing multiple alternative instructions may become confused, especially under stress and reduced visibility. Nevertheless, alternative routes remain essential when the primary escape path becomes unavailable.

What role do refuge chambers play?

Refuge chambers provide protected locations for workers who cannot safely reach the surface. Their positioning should consider travel distances, mine development, potential fire locations and ventilation conditions. Chambers also require suitable life-support systems, communication capabilities and maintenance procedures. Workers must understand when to evacuate, when to seek refuge and how to use the available emergency equipment. Refuge chambers complement evacuation planning; they do not replace the need for accessible escape routes and effective emergency coordination.

Why are communication and training essential?

Emergency procedures depend on timely communication between the control room, emergency response teams and underground personnel. Therefore:

  • Alarms and instructions must reach workers across different mine areas, including contractors, maintenance crews and personnel operating mobile equipment.
  • Assess radio systems, visual alarms, and other emergency communication methods for reliability during electrical failures or infrastructure damage.
  • Regular training is equally important. Workers must know how to recognise an emergency, use self-rescuers, follow designated escape routes and respond when their normal route becomes unsafe.
  • Drills should test more than evacuation speed. They should also assess communication quality, decision-making, personnel accountability and the ability to identify missing workers.

Research on underground mine evacuation highlights the importance of integrating fire conditions, ventilation information and evacuation route selection rather than relying exclusively on shortest-distance calculations. (4)  

 

Why Is Workforce Accountability Critical During an Underground Mine Fire?

Even a well-designed emergency plan faces a fundamental challenge: emergency coordinators must know who is underground, which workers may be affected and whether everyone has reached safety. During normal operations, personnel may be distributed across multiple levels, production areas, maintenance locations and access routes. Contractors and mobile equipment operators may change locations frequently. When a fire occurs, getting an accurate overview of personnel can be difficult, especially if communication systems are disrupted or evacuation is already underway.

How can mines identify personnel potentially affected by a fire?

Traditional personnel accounting methods may rely on access records, shift lists, radio calls and manual headcounts. Although these methods provide valuable information, they may not establish which underground zones workers occupied when the emergency began. A zone-based workforce accountability system can provide additional operational information by recording personnel presence within designated mine areas. Combined with fire risk assessments and ventilation scenario information, these records can help emergency coordinators identify which workers may have been in areas potentially affected by smoke or toxic gases. Distinguishing between confirmed and last-known presence matters. A system’s effectiveness depends on its coverage, update frequency, and ability to operate during the emergency.

How does emergency mustering support evacuation?

Emergency mustering helps coordinators establish whether personnel have reached designated safety areas, refuge chambers or the surface. Digital workforce accountability systems can support this process by consolidating personnel records and reducing dependence on manual comparisons of attendance lists. For example, IDENTEC SOLUTIONS’ Crew Companion provides zone-based personnel presence and workforce accountability capabilities that can support underground emergency mustering. Such systems complement established evacuation procedures and communication methods. They do not independently determine whether a route is safe or replace decisions made by trained emergency coordinators.

Why does personnel information matter for emergency decisions?

Emergency response teams must prioritise actions based on credible information. Knowing that a particular zone may be affected by smoke is useful. Knowing workers were last recorded in that zone makes the information more actionable. Similarly, identifying personnel who have not yet been accounted for can help emergency coordinators organise verification and rescue priorities without unnecessarily exposing responders to additional hazards. Reliable workforce accountability therefore supports situational awareness, evacuation coordination, and confirmation of personnel safety. (5)  

 

 

What Should HSE Managers Prioritise to Improve Underground Fire Readiness?

Underground fire safety requires ongoing coordination among HSE managers, ventilation engineers, mine operations, maintenance teams, and emergency response personnel.Five priorities deserve particular attention:

  • First, fire risk assessments must reflect actual underground conditions. Changes in equipment, infrastructure and mine development should trigger reviews of existing hazards and protective measures.
  • Second, ventilation and fire simulations should examine credible emergency scenarios, including electrical failures, equipment fires and the loss of ventilation controls. Their findings must be translated into practical emergency procedures.
  • Third, clearly define evacuation routes, refuge chambers, and emergency responsibilities. Procedures should be understandable to all underground personnel, including contractors and temporary workers.
  • Fourth, emergency communication and workforce accountability must remain reliable under challenging conditions. Emergency coordinators need timely information about affected areas, personnel presence and evacuation progress.
  • Finally, regular drills should test the complete emergency response process, not simply whether workers can reach an assembly point. Exercises should identify weaknesses in communication, decision-making, equipment readiness and personnel accounting.

The effectiveness of an underground fire safety program ultimately depends on how well technical planning, operational procedures and human behaviour work together. (6)  

 

FAQ

What is the biggest danger during an underground mine fire?

Smoke and toxic combustion products, particularly carbon monoxide, are among the greatest threats. Ventilation airflow can transport contaminants far beyond the original fire location. Reduced visibility, heat and restricted escape routes can further complicate evacuation.

How do underground mines evacuate workers during a fire?

Mines use predefined emergency procedures, alarms, designated evacuation routes, self-rescuers and refuge chambers. Evacuation decisions must consider the fire location, ventilation conditions and available escape routes. Emergency mustering helps confirm which workers have reached safety.

How can technology improve underground mine fire safety?

Fire detection systems provide early warnings, while ventilation simulations help predict potentially hazardous areas. Communication equipment supports emergency instructions, and workforce accountability systems track personnel presence and evacuation status. Together, these technologies can improve emergency preparedness and response coordination. 

 

Takeaway

An underground mine fire can threaten personnel far beyond its point of origin. Effective prevention and emergency planning require structured risk assessments, reliable fire detection, ventilation analysis and clearly defined evacuation procedures.For underground mine safety, understanding how smoke and toxic gases can move is only part of the challenge. Emergency coordinators must also know which workers may be affected, communicate instructions and confirm that personnel have reached safety. Combining engineering controls with workforce accountability, regular training and realistic emergency exercises strengthens a mine’s ability to protect people during a fire (see: miners safety).

 

Delve deeper into one of our core topics: Mining safety

 

Glossary

Simulation uses mathematical or computer-based models to reproduce how a real system might behave under defined conditions. In underground mining, fire simulations estimate how heat, smoke, toxic gases and ventilation airflow may change during an emergency. Engineers use these models to evaluate fire scenarios, identify potentially hazardous areas and assess evacuation strategies. Simulation supports emergency planning by allowing examination of different conditions and mitigation measures without exposing workers to actual danger. (7) 

References:

(1) Alvarez et al. (2020), Emergency plan methodology for mine fire simulations in Chuquicamata underground mine. https://www.tandfonline.com/doi/full/10.1080/19236026.2020.1750288

(2) https://www.cdc.gov/niosh/mining/features/

(3) https://ventsim.com/wp-content/uploads/2019/04/Fire_Modelling_in_Underground_Mines_using_Ventsim_VentFIRE.pdf

(4) https://stacks.cdc.gov/view/cdc/207932

(5) https://stacks.cdc.gov/view/cdc/208099

(6) https://www.cdc.gov/niosh/mining/topics/fires-explosions.html

(7) Brake, D. J. (2013). Fire Modelling in Underground Mines Using Ventsim Visual VentFIRE Software. The Australian Mine Ventilation Conference, Adelaide, Australia. 

Note: This article was partly created with the assistance of artificial intelligence to support drafting. The head image and the illustration was created by AI.