Role-Based Skills and Competencies

What does “role-based competency” mean in a container terminal?

Role-based competency means defining the knowledge, practical skills, judgement and behaviours required to perform a specific terminal role safely and effectively. A container terminal should not treat “being trained” as sufficient; competence must be linked to the actual tasks and responsibilities of each position. An equipment operator, planner, technician and supervisor may work within the same operation but face very different risks and decisions. The ILO’s training framework explicitly uses a competency-based approach for portworker training and covers container operations, ship loading and discharge, yard operations, safety, performance measurement and supervision. This provides a useful foundation for terminals developing their own competency frameworks. The objective should be to make expectations clear, assessable and relevant to the job rather than relying on generic induction training. Reference: ILO – Guidelines on training in the port sector

Back to top ˄

What core competencies should every container-terminal worker have?

Every terminal worker should have a common foundation before developing role-specific skills. This normally includes understanding the terminal layout and operating processes, recognising workplace hazards, following safe systems of work, communicating effectively, responding to emergencies and understanding the worker's own responsibilities for safety and operational quality. Workers also need enough knowledge of container handling to understand how their task affects the wider operation. The ILO Portworker Development Programme treats safe working, container operations, vessel operations, yard operations and performance as interconnected areas rather than isolated subjects. This is important because mistakes frequently occur at the interfaces between roles. A shared baseline allows operators, planners, technicians and supervisors to understand one another's constraints and make safer decisions. Core competencies should therefore be established before specialised competencies are layered on top. Reference: ILO – Portworker Development Programme I (Container terminal)

Back to top ˄

What competencies are most important for quay crane operators?

Quay crane operators need much more than the ability to move a spreader accurately. Their competence should cover safe lifting practices, crane controls, load behaviour, container identification, communication with other personnel, awareness of surrounding traffic and equipment, abnormal situations and operating limits such as wind conditions. They must also understand when an operation should be stopped rather than attempting to resolve a problem through improvisation. The ILO's container-terminal training programme specifically includes ship loading and discharge, safe working in container terminals and the operation of container-related equipment. HSE guidance similarly stresses that people using work equipment must have adequate training and competence for the equipment, risks and precautions involved. In practice, terminals should therefore assess crane operators against both technical performance and safety-critical decision-making rather than measuring competence purely through productivity or crane moves per hour. Reference: HSE – Training and competence

Back to top ˄

What competencies are required for yard equipment operators?

Yard equipment operators need a combination of machine-specific operating skills and a strong understanding of the environment in which the equipment works. Depending on the terminal, this can include RTGs, RMGs, reach stackers, empty-container handlers, terminal tractors or other equipment. Operators must understand load characteristics, stability, visibility limitations, traffic rules, pedestrian risks, container identification and safe positioning. They also need to recognise abnormal equipment behaviour and know when to stop and report a problem. Competence cannot be assumed simply because someone has operated similar machinery elsewhere: equipment configuration, traffic arrangements and operating procedures differ between terminals. HSE guidance states that competence involves an appropriate combination of knowledge, skill and experience, while the ILO container-terminal curriculum addresses yard operations and safe working as distinct areas of competence. Reference: HSE – Training and competence

Back to top ˄

What skills should terminal planners have?

Terminal planners need a broader operational understanding than simply knowing how to use planning software. They should understand vessel stowage principles, loading and discharge sequences, yard capacity, container characteristics, equipment availability, traffic flows and the consequences of planning decisions for quay, yard and landside operations. They also need analytical judgement: a theoretically efficient plan may be impractical if it creates excessive rehandles, equipment conflicts or unsafe working conditions. The ILO's container-terminal programme includes ship stowage plans, loading and discharge work plans, yard storage operations and terminal performance measurement, illustrating the breadth of knowledge required. Effective planners should also understand how their decisions affect operators and supervisors in real time. Planning competence is therefore best viewed as operational competence supported by specialist planning tools, rather than as software proficiency alone. Reference: ILO – Portworker Development Programme

Back to top ˄

What competencies should container-terminal technicians have?

Technicians require a combination of mechanical, electrical, electronic and diagnostic competence appropriate to the equipment they maintain. Their responsibilities can extend from planned maintenance and fault diagnosis to safety-critical interventions on cranes, vehicles, sensors, control systems and other terminal infrastructure. They need to understand equipment manuals, maintenance procedures, isolation requirements and the consequences of returning equipment to service incorrectly. They should also be capable of communicating technical findings to operators and supervisors, particularly when a defect affects operational safety. Competence must be specific to the equipment and risks involved; general technical qualifications do not automatically demonstrate competence on a particular terminal system. HSE guidance emphasises that competence depends on knowledge, skills and experience and that people supervising or managing work equipment also need sufficient competence to do so safely. Reference: HSE – Training and competence

Back to top ˄

What competencies distinguish an effective terminal supervisor?

A terminal supervisor sits at a critical point between management plans and operational execution. The role requires technical understanding of terminal processes, leadership, communication, hazard awareness, decision-making and the ability to intervene when conditions become unsafe. Supervisors must understand what workers are doing, recognise deviations from safe procedures and ensure that problems are addressed rather than normalised. The ILO specifically identifies supervisory excellence as a dedicated component of its container-terminal programme, covering the supervisor's organisational status, tasks, supervisory skills and personal attributes, as well as supervision of quay, yard and landside operations. Its safety guidance also stresses that supervisors must be trained and competent to ensure that port work is carried out safely as well as efficiently. Reference: ILO – Safety and health in ports

Back to top ˄

What competencies are needed by control-room staff?

Control-room staff need a systems-level understanding of terminal operations because they often monitor and coordinate activities rather than physically perform the task themselves. Their competencies should include situational awareness, understanding of equipment status, knowledge of terminal operating procedures, prioritisation, incident escalation and clear communication with field personnel. They must distinguish between routine deviations and situations requiring immediate intervention. In increasingly automated terminals, control-room personnel also need to understand the limits of automation and recognise when human intervention is required. The ILO's container-terminal programme links operational knowledge with performance analysis and supervision, providing a useful competency foundation. The World Bank likewise emphasises the importance of planning, briefing, communication and rapid escalation when disruptions occur. Control-room competence should therefore combine operational knowledge with disciplined decision-making under time pressure. Reference: World Bank – Port Reform Toolkit, labour and management practices

Back to top ˄

How should competencies differ between operators, planners, technicians and supervisors?

Competencies should overlap where roles interact but remain distinct where responsibilities differ. Operators need strong practical equipment and safety skills; planners need process knowledge, sequencing and analytical judgement; technicians require technical diagnosis and maintenance competence; supervisors need leadership, coordination and intervention skills. A useful competency framework therefore has both common competencies and role-specific competencies. The ILO's container-terminal programme illustrates this structure by combining terminal operations, safety and performance knowledge with separate supervisory learning units. HSE guidance also makes clear that competence depends on the particular work, equipment and level of responsibility involved. This prevents a common mistake: applying one generic training checklist to everyone. The framework should identify what each role must know, what each person must be able to do, what decisions they are authorised to make and what evidence demonstrates competence. Reference: ILO – Portworker Development Programme I (Container terminal)

Back to top ˄

How important is cross-training between different terminal roles?

Cross-training can make the workforce more flexible, particularly when demand fluctuates between quay, yard and landside operations. It can allow terminals to redeploy suitably qualified workers when workloads change rather than maintaining completely separate pools for every activity. However, cross-training should not mean allowing people to perform unfamiliar tasks without demonstrating competence. Each additional role needs its own training, assessment and authorisation. The World Bank notes that some ports use cross-training so workers can shift between yard and quay duties, helping terminals respond to peaks in workload. The ILO's competency-based approach also supports structured development across different areas of terminal work. The key is to treat cross-training as a controlled expansion of competence rather than simple multi-tasking. A worker should only be assigned to another role once the terminal has established that the required competencies have actually been demonstrated. Reference: World Bank – Port Reform Toolkit, labour and management practices

Back to top ˄

Why should competency requirements be defined for specific equipment?

Two pieces of equipment may perform broadly similar tasks while presenting significantly different controls, operating characteristics and hazards. A worker experienced on one crane, vehicle or handling system cannot automatically be considered competent on another. Equipment-specific competency requirements should cover the machine's controls, operating envelope, safety systems, normal procedures, abnormal situations and relevant environmental limitations. HSE guidance explicitly states that training must address the equipment being used, the risks its use may entail and the precautions required. It also notes that changes to equipment or systems of work may require additional training. For container terminals, this means competency matrices should identify equipment categories and, where necessary, individual equipment types or configurations. This approach is particularly important during fleet renewal, automation projects or equipment upgrades, when assuming that previous experience remains sufficient can create a significant safety gap. Reference: HSE – Training and competence

Back to top ˄

How should safety competence be incorporated into every terminal role?

Safety should be treated as a core part of operational competence rather than as a separate training subject. An operator should demonstrate safe equipment operation; a planner should understand the safety consequences of a plan; a technician should understand isolation and maintenance risks; and a supervisor should be capable of recognising and correcting unsafe behaviour. The ILO Code of Practice states that supervisors must be trained and competent to ensure port work is carried out safely and efficiently, while workers have responsibilities to comply with safe methods and cooperate on safety. The same principle applies to all terminal roles. Competency frameworks should therefore include hazard recognition, safe systems of work, emergency response and stop-work responsibilities alongside technical duties. This makes safety part of how the job is performed, rather than something checked only during an annual safety course. Reference: ILO – Safety and health in ports, Revised 2016

Back to top ˄

How should supervisors' competencies differ from those of experienced operators?

An experienced operator may be highly competent at performing a particular task without necessarily being competent to supervise other people performing it. Supervisors need additional skills in planning, coordination, communication, risk assessment, decision-making and performance management. They must understand enough of each operation to recognise unsafe or inefficient practices, but they also need to manage the wider operational picture. The ILO specifically separates supervisory competencies from operational competencies, identifying supervisory skills and personal attributes alongside knowledge of supervising vessel, quay, yard and receipt/delivery operations. This distinction matters because promoting the best operator into a supervisory position without developing management and leadership competence can create a gap. Technical expertise is valuable, but supervision requires a different layer of competence: turning operational knowledge into consistent performance across a team. Reference: ILO – Portworker Development Programme

Back to top ˄

What role does experience play in demonstrating competency?

Experience is an important component of competence, but experience alone is not proof of competence. Someone may perform the same task for years while developing unsafe habits or never encountering particular abnormal situations. Competence should therefore combine knowledge, practical ability, experience and appropriate judgement. HSE guidance explicitly describes competence in these terms and notes that training, knowledge, experience and skill contribute to developing it. In a container terminal, experience should be captured through structured observation, practical assessment, performance records and supervisor feedback. Experienced workers can also contribute significantly as mentors and trainers, provided they themselves are competent to train others. The objective is to convert experience into demonstrable capability rather than relying on seniority as a proxy for competence. This becomes particularly important when experienced employees move to new equipment, new procedures or new operating environments. Reference: HSE – Training and competence

Back to top ˄

How should competency gaps be identified in a container terminal?

A terminal should identify competency gaps by comparing the skills required for each role with the competencies actually demonstrated by individual workers. This begins with a competency matrix covering roles, equipment, tasks and required proficiency levels. Evidence can come from practical assessments, observations, incident investigations, supervisor feedback, performance results and changes in equipment or procedures. The ILO's training framework is explicitly competency-based and includes assessment tools as part of its training methodology. HSE likewise stresses that employers must determine what training is appropriate for the particular equipment and circumstances. A gap should not automatically be interpreted as a need for classroom training. The appropriate response could be supervised practice, mentoring, simulator work, additional technical training or reassessment. The important point is to diagnose the actual missing capability rather than simply increasing training hours. Reference: ILO – Portworker Development Programme

Back to top ˄

How can a terminal maintain competency when work processes or equipment change?

Competency must evolve whenever the work changes. New cranes, automation systems, revised traffic arrangements, new operating procedures or changes in terminal layout can introduce risks and skills that existing training does not cover. HSE guidance explicitly states that changes in work equipment, systems of work or the introduction of new equipment may require additional training to maintain competence. Terminals should therefore include a competency review in every significant operational or technology change. The review should identify which roles are affected, which existing competencies remain valid, what new competencies are required and how those competencies will be demonstrated before normal operation begins. This is particularly important during automation projects, where experienced operators may need to transition from direct equipment control towards monitoring, exception handling or remote operation. Competence should be treated as a living requirement, not a qualification acquired once and then permanently assumed. Reference: HSE – Training and competence

Back to top ˄

How should competency be assessed before a worker is authorised to perform a role independently?

Independent authorisation should follow demonstrated competence rather than completion of a training course alone. A robust process normally combines theoretical knowledge, practical demonstration, observation under realistic operating conditions and an assessment of safety-critical decisions. The assessment should reflect the actual role, equipment and operating environment. The ILO's Portworker Development Programme includes assessment tools within its training methodology, while HSE states that competence involves knowledge, experience and skill and that people using or supervising work equipment must be sufficiently competent. A terminal can therefore establish clear criteria for each role: what the worker must know, what they must be able to perform, what errors are unacceptable and what level of supervision is required during initial operation. Authorisation should then be documented and reviewed when equipment, procedures or responsibilities change. Reference: ILO – Portworker Development Programme 

Back to top ˄

Terminal Tracker

Your customers want reliable terminal services and scheduling. Terminal Tracker makes operations planning take minutes. Our powerful management system orchestrates assets efficiently for each vessel. Designed to integrate into your container terminal's IT landscape, it becomes core to operations. Plan shifts ahead, reserve vehicles and workforce. Adaptable to your yard and future needs, plug-and-play with your TOS, with easy Professional Services installation.  

Terminal Tracker by Identec Solutions  

Technical and Digital Skills

What technical skills should container-terminal equipment operators have?

Equipment operators need a combination of machine-specific operating skills, safety awareness and sufficient understanding of the terminal process around them. For quay cranes, RTGs, RMGs, terminal tractors and other equipment, this includes understanding controls, load behaviour, operating limits, safety systems, alarms and abnormal situations. Operators also need to understand how their actions affect other equipment and people working nearby. The ILO's container-terminal training framework treats equipment operation as part of a wider operational system that includes quay, yard and landside activities. Competence should therefore not be reduced to operating a machine smoothly or achieving a target number of moves. Operators need to demonstrate that they can use equipment safely, recognise deviations and respond appropriately when normal operation breaks down. HSE similarly emphasises that competence depends on knowledge, skills and experience and must be appropriate to the particular equipment and task. Reference: HSE – Training and competence

Back to top ˄

How important is familiarity with the Terminal Operating System (TOS) for operational staff?

TOS knowledge has become an important operational skill because many terminal activities depend on digital instructions, container records, work queues and status information. The required depth varies by role. An equipment operator may need to understand job assignments, container identifiers and confirmation procedures, while planners and control-room personnel require considerably deeper knowledge of planning, exceptions, priorities and system status. The objective is not to make every employee a TOS expert but to ensure that each person understands the digital information required to perform their role correctly. The ILO's container-terminal curriculum already connects operational work with container identification, ship workplans, yard operations and terminal performance measurement. As terminals become more digitally integrated, employees increasingly need to understand both the physical operation and the digital workflow that controls or records it. Reference: ILO – Portworker Development Programme

Back to top ˄

What digital skills should planners and control-room staff develop?

Planners and control-room staff need stronger digital capabilities than most field operators because they work with larger volumes of operational information. They should be able to interpret TOS data, understand equipment and container status, identify exceptions, recognise inconsistencies and use digital tools to support decisions. Basic data literacy is particularly important: staff should understand what a metric represents, where information comes from and when apparently precise data may be incomplete or misleading. The ILO's programme includes specific learning units on measuring and analysing terminal performance, alongside operational planning and supervision. This reflects an important principle: digital skills should support operational judgement rather than replace it. As automation and digitisation increase, the ability to interpret information and make sound decisions when systems generate unexpected results becomes increasingly valuable. Reference: ILO – Portworker Development Programme

Back to top ˄

Why is data literacy becoming important for container-terminal workers?

Data literacy allows employees to understand and act correctly on the information generated by modern terminal systems. This does not mean that every worker needs advanced statistical skills. It means understanding basic concepts such as status, timestamps, exceptions, trends, performance indicators and data quality. A supervisor, for example, needs to distinguish between a genuine productivity problem and a data-recording problem. A planner needs to recognise when system information is incomplete before making a decision based on it. The ILO specifically includes terminal performance measurement and analysis within its container-terminal curriculum, showing that operational competence increasingly includes understanding performance information. Digitalisation also makes the distinction between “following a system instruction” and “understanding what the system is telling you” increasingly important. Good data literacy helps workers challenge anomalous information instead of blindly acting on it. Reference: ILO – Guidelines on training in the port sector

Back to top ˄

What should workers know about automated terminal equipment?

Workers interacting with automated equipment need to understand the equipment's operating principles, operating zones, status indications, alarms, restrictions and intervention procedures. They also need to know the boundary between normal automated operation and situations requiring human intervention. This is particularly important because automation changes the nature of some jobs rather than simply eliminating them. Employees may move from direct equipment operation towards monitoring, exception handling, coordination and recovery. The ILO's competency-based approach provides a useful foundation because it emphasises adapting workforce skills to advanced cargo-handling methods. HSE guidance similarly states that changes to work equipment or systems of work may require additional training. The essential competency is therefore not merely “knowing how automation works”, but being able to work safely and effectively alongside automated systems and respond appropriately when automation does not behave as expected. Reference: ILO – Guidelines on training in the port sector

Back to top ˄

How should technical skills change when a terminal introduces automation?

Automation can shift the skills profile from direct physical control towards monitoring, diagnostics, exception management and system awareness. Existing operators may therefore need additional competencies rather than simply fewer competencies. A crane operator moving towards remote operation, for example, may need to interpret multiple camera feeds, system states, alarms and equipment diagnostics while maintaining awareness of the wider operation. Maintenance personnel may need stronger skills in control systems, sensors, communications and software-supported diagnostics. The ILO notes that training should support port workers in responding to advanced cargo-handling methods, while HSE specifically states that introducing new equipment or changing a system of work may require additional training. Terminals should therefore conduct a skills-impact assessment before automation is introduced and identify which existing competencies remain relevant, which must be strengthened and which new competencies are required. Reference: ILO – Portworker Development Programme

Back to top ˄

What technical skills do maintenance technicians need in increasingly automated terminals?

Technicians increasingly need a multidisciplinary skill set. Traditional mechanical and electrical knowledge remains essential, but automated equipment may also require competence in sensors, programmable controllers, industrial networks, control systems, diagnostics and software interfaces. Technicians need to understand how these components interact because a fault in an automated system may originate outside the mechanical component that initially appears defective. They must also know how to isolate equipment safely before intervention and how to verify that it is safe to return to service. HSE defines competence as a combination of training, skills, experience and knowledge applied safely to a task. As equipment becomes more digitally integrated, the competency framework should therefore evolve alongside the equipment itself. Training should focus not only on individual components but also on system-level fault finding and the interaction between physical equipment and its control architecture. Reference: HSE – What is competence?

Back to top ˄

How much TOS knowledge does an equipment operator actually need?

The answer should depend on the operator's responsibilities. Operators generally do not need the same depth of TOS knowledge as planners, but they need enough to understand digital work instructions, equipment assignments, container information, job status and exception procedures relevant to their work. They should also understand what to do if the digital instruction appears incorrect, becomes unavailable or conflicts with the physical situation. This distinction is important because excessive training can waste time, while insufficient training can create operational errors. The ILO's container-terminal curriculum links container identification, quay transfer, yard storage and receipt/delivery operations with wider terminal processes. A practical competency framework should therefore define the exact TOS functions each role uses and assess those functions rather than simply recording that the worker has attended “TOS training”. Reference: ILO – Portworker Development Programme

Back to top ˄

What skills are needed to interpret equipment alarms and system warnings?

Workers need enough technical understanding to distinguish between normal status information, warnings requiring attention and alarms requiring immediate intervention. They should know what the indication means, what actions are permitted, what actions are prohibited and when the problem must be escalated to a supervisor or technician. This is particularly important on automated or highly instrumented equipment, where workers may encounter large numbers of messages. Training should therefore focus on decision-making rather than memorising every possible alarm. HSE's competence guidance stresses that competence involves applying knowledge and skills safely to the actual task and that training must reflect the equipment and risks involved. For terminal equipment, this means employees should understand the operational significance of alarms and the correct response path rather than simply learning where an alarm appears on a screen. Reference: HSE – Training and competence

Back to top ˄

Why do terminal workers need to understand the interaction between physical and digital operations?

A container terminal increasingly operates as a combination of physical processes and digital control. A container may be physically in one location while a system record indicates another; a vehicle may receive a digital job that conflicts with an operational restriction; or an automated system may stop because a sensor or communication link has failed. Workers therefore need enough understanding of both worlds to recognise discrepancies and respond safely. The ILO's curriculum combines physical container-terminal operations with container identification, workplans and performance analysis, reflecting this integrated nature of terminal work. Competence should consequently include the ability to compare system information with physical reality and escalate discrepancies rather than assuming that the digital record is always correct. This becomes increasingly important as terminals automate more decisions and rely more heavily on interconnected information systems. Reference: ILO – Portworker Development Programme

Back to top ˄

What communication skills are needed when technology becomes part of the workflow?

Technology does not remove the need for communication; it changes what people need to communicate. Workers must be able to report equipment faults, unexpected system behaviour, incorrect container information, blocked routes and safety concerns clearly and quickly. Supervisors and control-room personnel need to translate digital information into clear instructions for field workers, while operators need to communicate when the physical situation differs from the system's expectation. The ILO's training framework treats safe working, operations and supervision as interconnected competencies, while its supervisory units specifically address supervisory skills and duties. Effective technical training should therefore include communication around digital systems, not just button-by-button software instruction. A technically competent employee who cannot clearly communicate an exception can still create significant operational and safety problems. Reference: ILO – Portworker Development Programme

Back to top ˄

How can workers develop the skills needed to work with new terminal technologies?

New technology skills should be developed through a combination of structured instruction, practical experience and competency assessment. Classroom or digital learning can explain the system, but workers also need opportunities to use it in realistic operating situations and deal with abnormal conditions. HSE explicitly recognises several training methods, including self-study, in-house instruction, formal training, supervised practical learning and external training. It also states that changes in equipment or systems may require additional training. The ILO similarly promotes systematic, competency-based training rather than isolated instruction. Terminals should therefore introduce technology training as a structured transition programme: explain the technology, demonstrate its use, allow supervised practice, assess competence and provide additional support where gaps remain. This approach is more reliable than assuming that experienced employees will automatically adapt to new technology simply because they already understand the underlying operation. Reference: HSE – Training and competence

Back to top ˄

Should digital skills be the same for all terminal employees?

No. Digital competency should be role-based, just like equipment competency. An equipment operator needs a focused set of digital skills directly connected to job execution. A planner needs greater skills in planning applications and operational data. A control-room employee needs broader system awareness and exception management, while a technician may require detailed knowledge of equipment diagnostics and control systems. Applying one identical digital curriculum to everyone is inefficient and can still leave critical gaps. The ILO's competency-based training framework supports tailoring training to the tasks and responsibilities of different port roles. HSE similarly states that the level of competence required should be proportionate to the job and workplace. The better approach is therefore to define a digital skills profile for each role and identify the minimum proficiency required before the employee can work independently. Reference: HSE – What is competence?

Back to top ˄

How important is cybersecurity awareness for terminal staff?

Cybersecurity awareness is becoming an operational competency because terminal employees increasingly interact with interconnected digital systems. Workers should understand basic security behaviours such as protecting credentials, recognising suspicious requests, following access-control procedures and reporting unusual system behaviour. The depth required will differ by role, with system administrators and technical personnel needing substantially more specialised knowledge than equipment operators. The key point is that cybersecurity is not solely an IT responsibility: human actions can affect the security and availability of operational technology. The IMO's work on modernising maritime training recognises that digitisation and automation are changing the competencies required in maritime operations. For container terminals, this suggests that digital competence should increasingly include awareness of the security implications of using connected operational systems. Reference: IMO – Comprehensive review of the STCW Convention and Code

Back to top ˄

How should technical and digital competencies be assessed?

Assessment should test whether employees can actually apply their knowledge in the conditions in which they work. Written tests can verify understanding, but practical demonstrations, supervised operation, scenario-based exercises and observation are often needed to establish whether a person can perform safely and correctly. The ILO's Portworker Development Programme includes assessment tools within its standard training units, reinforcing the principle that training and assessment should be connected. HSE similarly states that competence involves applying knowledge and skills to perform tasks safely and notes that assessment and reassessment are part of maintaining competent people. For digital skills, assessment might involve completing representative TOS tasks, responding correctly to system exceptions or interpreting operational information. For equipment-related skills, practical performance should form a central part of the assessment. The result should be evidence of competence, not simply evidence of attendance. Reference: ILO – Portworker Development Programme

Back to top ˄

How can terminals prevent technical skills from becoming obsolete?

Technical competence needs continuous development because terminal equipment, software and operating methods change. A worker who was fully competent several years ago may require additional training after a new crane control system, TOS version, automation platform or diagnostic technology is introduced. HSE explicitly states that training may need to be refreshed at suitable intervals and that changes in equipment or systems of work can require additional training. The ILO's training guidelines likewise emphasise skills development in response to advanced cargo-handling methods. Terminals should therefore connect competency management to their change-management process. Whenever technology changes, the terminal should ask which roles are affected, which competencies must be updated and how competence will be reassessed. This creates a continuous skills cycle rather than treating technical training as something that ends when an employee first becomes qualified. Reference: Shortage of capabilities: uplifting skills in automated terminals 

Back to top ˄

Terminal Tracker

Gain true insight into terminal operations with comprehensive records of container movements and vehicle usage. As a manager, safety and productivity are paramount. Improve behavioural safety by analysing incidents and sharing accurate data. Fewer accidents reduce container damage and claims. Terminal Tracker provides comprehensive planning, yard optimisation via real-time data, and fleet management based on recorded vehicle information for complete visibility. 

Terminal Tracker by Identec Solutions  


 

Training, Certification and Recertification

What is the difference between training, qualification, certification and competence?

These terms should not be treated as interchangeable. Training is the process of developing knowledge and skills. A qualification normally confirms that a person has achieved a defined educational or vocational standard. Certification provides documented evidence that a specified requirement or assessment has been completed. Competence is the ability to apply knowledge, skills and experience safely and effectively in the actual workplace. The distinction matters in container terminals because completing a course does not automatically make someone competent to operate a particular machine or perform a particular task independently. The ILO promotes a competency-based approach to portworker training, while HSE explicitly states that training, knowledge, experience and skills contribute to competence but that training itself is not the whole picture. A terminal should therefore define what evidence is required before a worker is authorised to perform safety-critical work. Reference: HSE – What is competence?

Back to top ˄

Which container-terminal roles normally require formal qualifications or certification?

Requirements vary considerably according to national legislation, the specific equipment and the task. Operators of certain types of lifting or mobile equipment may require formal qualifications, licences or recognised certificates, while other roles may be controlled through employer-specific competence assessment. The important point is to distinguish legal or regulatory requirements from internal terminal requirements. For example, EU Directive 2009/104/EC requires employers to ensure that workers using work equipment receive adequate training, including training on associated risks; it does not create one universal European certificate for every type of terminal equipment. HSE similarly notes that some activities have specific training requirements while others can be covered by appropriate in-house training and assessment. Terminals should therefore maintain a role-by-role register showing which qualifications are legally mandatory, which are industry-recognised and which are required by the terminal itself. Reference: EUR-Lex – Directive 2009/104/EC, Article 9: Training of workers

Back to top ˄

What should a terminal's competency and certification matrix contain?

A competency matrix should show, for every relevant role, the tasks and equipment a worker is authorised to perform, the required training, qualification or certification, the date achieved, expiry or review date where applicable, and the current competency status. It should also distinguish between initial training, conversion training, refresher training and reassessment. For example, an employee might be qualified for one type of terminal tractor but still require conversion training before using another type of vehicle. HSE recommends maintaining records of training and assessments and emphasises that competence must reflect the actual equipment and circumstances of work. The ILO Code of Practice for Safety and Health in Ports goes further by recommending that records be maintained of the training each portworker has received and the competencies attained. A well-designed matrix therefore becomes a live authorisation tool, not simply an HR record. Reference: ILO – Safety and health in ports, Revised 2016

Back to top ˄

What should initial training for a new container-terminal worker include?

Initial training should establish a safe foundation before the employee begins independent work. It should normally include general terminal induction, site-specific hazards, traffic arrangements, emergency procedures, communication requirements and the worker's responsibilities. It should then progress to job-specific training covering the tasks, equipment and risks associated with the person's role. The ILO specifically distinguishes general induction from job-specific training and states that job-specific training should be provided to port workers working with cargo, not only equipment operators. The training should also account for the worker's previous experience: someone experienced in another terminal may need less generic instruction but still requires site-specific familiarisation. Completion of induction should not itself authorise independent operation. The employee should progress through practical training, supervised work and competency assessment before receiving the appropriate operational authorisation. Reference: ILO – Safety and health in ports, Revised 2016

Back to top ˄

Why is site-specific training necessary when a worker already holds a recognised qualification?

A qualification demonstrates that a person has achieved a defined standard, but it does not necessarily demonstrate familiarity with a particular terminal's layout, equipment, procedures or risks. A qualified equipment operator arriving from another terminal may still need training on local traffic routes, equipment configuration, communication protocols, operating zones, emergency arrangements and site-specific procedures. HSE's guidance on lift-truck training illustrates this principle: even trained operators need specific job and familiarisation training, and experience with one type of truck does not automatically authorise operation of another. HSE's human-factors guidance likewise states that vocational qualifications should include site-specific aspects and link appropriately to workplace hazards and risks. Container terminals should therefore treat external qualifications as one component of competence, followed by documented local familiarisation and assessment before independent operation. Reference: HSE – Training and competence: human factors

Back to top ˄

How should a terminal decide when refresher training is necessary?

Refresher training should be driven by risk and evidence rather than by an arbitrary calendar alone. It may be appropriate when workers have not performed a task for an extended period, when unsafe practices are observed, after an accident or near miss, following significant changes to equipment or procedures, or when assessments show declining competence. HSE specifically recommends refresher training where appropriate and notes that skills can decline when they are not regularly used. For lift-truck operators, HSE suggests that organisations may use periodic reassessment, but stresses that additional training may be required before the scheduled interval if circumstances indicate a need. For container terminals, the same principle can be applied to cranes, terminal vehicles, control-room tasks and other safety-critical activities. The objective should be maintained competence, not simply compliance with a training calendar. Reference: HSE – Refresher training

Back to top ˄

Is there a universal three-year or five-year rule for refresher training?

No. There is no universal interval that applies to every container-terminal role or every country. The appropriate frequency depends on the task, risk, equipment, worker experience, frequency of operation and applicable national or industry requirements. HSE explicitly states that there is no specific fixed period for refresher training for lift-truck operators, although employers may choose a periodic reassessment interval such as three to five years as part of their competence system. It also stresses that workers should be monitored and retrained earlier when circumstances require it. This is a useful principle for terminals: a periodic review can provide structure, but it should not replace ongoing observation. A worker performing a safety-critical task every day may need a different approach from someone who performs it only occasionally. The terminal's risk assessment should determine the appropriate training and reassessment strategy. Reference: HSE – Lift-truck training

Back to top ˄

When should a worker receive conversion or additional training?

Conversion training is appropriate whenever existing competence does not fully cover the new equipment, task or operating environment. This can occur when a worker changes equipment type, moves to another terminal area, takes on a new task, or encounters a significant change in the system of work. HSE specifically notes that an operator trained on one type of lift truck or attachment cannot safely operate another type without additional conversion training. It also identifies new technology, new equipment and changes in work systems as triggers for additional training. Container terminals should apply the same principle more broadly. Introducing a new crane control system, automated equipment, different vehicle type or revised operating procedure should trigger a competency review. The worker may not need to repeat everything from the beginning, but the terminal should identify the differences and train and assess them specifically. Reference: HSE – Voluntary accreditation schemes for lift-truck training

Back to top ˄

How should competency be assessed after training?

Assessment should demonstrate that the worker can apply the required knowledge and skills safely, not merely that they attended a course. Depending on the task, this can involve written or oral knowledge testing, practical demonstrations, observation, scenario-based exercises and formal evaluation by a competent assessor. HSE recommends that training may be accompanied by documented competence assessment and states that assessment methods should be appropriate to the hazards involved. For safety-critical tasks, the assessment should be correspondingly robust. The ILO's Portworker Development Programme provides assessment tools as part of its standard training package, reinforcing the connection between learning and demonstrated outcomes. In a terminal, assessment should ideally reflect real operating conditions, including relevant abnormal situations. Successful completion should then be recorded in the competency system, with clear authorisation boundaries rather than a vague statement that the employee is “trained”. Reference: ILO – Portworker Development Programme I: Container terminal

Back to top ˄

Who should be allowed to assess a container-terminal worker's competence?

Assessors should themselves possess sufficient technical knowledge, practical experience and assessment ability for the task they are evaluating. The appropriate person may be an experienced internal trainer, supervisor, technical specialist or qualified external assessor, depending on the activity and applicable requirements. HSE states that people providing training must be sufficiently skilled and competent and that competent in-house staff can provide training when they have the necessary industrial experience, knowledge and ability to assess the skills attained. For higher-risk or formally regulated activities, external or independently recognised assessment may be required by national rules or industry schemes. Terminals should avoid allowing someone to assess a task simply because they are senior or experienced. The assessor must understand both the technical standard and the assessment process. This separation is particularly valuable for safety-critical roles where inconsistent assessment could result in workers being authorised before they are genuinely competent. Reference: HSE – Training and competence

Back to top ˄

How should failed competency assessments be handled?

A failed assessment should be treated as evidence of a competency gap, not as a reason to simply issue a certificate after another attempt. The terminal should identify what the worker could not demonstrate, provide targeted additional training or supervised practice, and reassess the specific gap. HSE's lift-truck guidance provides a clear example: where an operator fails an assessment, further training should be arranged before competence is accepted. Records of assessments can also be maintained in personnel records. For container-terminal roles, the response should be proportionate to the risk. A minor knowledge gap may require focused instruction, while unsafe performance on a safety-critical task may require suspension of independent authorisation until competence has been demonstrated. The goal is not to maximise pass rates; it is to ensure that workers are genuinely capable of performing the task safely and consistently. Reference: HSE – Lift-truck training

Back to top ˄

How important is recertification after a worker has been absent from a task?

A prolonged absence can reduce practical competence even when the worker's original qualification remains formally valid. This is especially relevant for infrequently performed or safety-critical tasks. A terminal should therefore consider the length of absence, the complexity of the task and the worker's previous experience before returning them directly to independent operation. HSE recommends reassessment and, where necessary, refresher training for operators who have not used equipment for some time. Its broader competence guidance also identifies infrequent and complex activities as situations requiring particular attention. For a container terminal, a return-to-task process might include a knowledge review, equipment familiarisation, supervised practical operation and a targeted competency check. The important distinction is between certificate validity and current operational competence. A document may remain valid while the worker still needs practical re-familiarisation before resuming independent duties. Reference: HSE – Training and competence: human factors

Back to top ˄

What role should training records play in competency management?

Training records provide evidence of what a worker has been trained and assessed to do, when it occurred and whether further action is required. They are particularly important in terminals where employees may work across several equipment types, shifts or operational areas. The ILO Code of Practice recommends maintaining records of the training each port worker has received and the competencies attained. HSE likewise recommends keeping records of training and assessments and provides training-record guidance for workplace transport. A useful terminal record should go beyond course attendance: it should identify the role or equipment covered, assessment outcome, authorisation status, refresher requirements and relevant restrictions. Records should be readily accessible to supervisors responsible for allocating work. This turns training documentation into an operational control: before assigning a worker to a task, management can verify that the necessary competence and authorisation are current. Reference: HSE – Refresher training

Back to top ˄

How should mandatory qualifications be distinguished from terminal-specific requirements?

A terminal should maintain a clear distinction between three categories: requirements imposed by law or regulation, recognised industry or vocational qualifications, and additional competencies required by the terminal itself. This prevents confusion when workers or managers assume that possession of a certificate automatically provides unrestricted authorisation. EU Directive 2009/104/EC establishes employer duties concerning adequate training for work equipment, while national legislation may impose more specific requirements. HSE's guidance illustrates the same distinction: some activities have recognised or mandatory training requirements, whereas other equipment can be covered through appropriate employer-led training and assessment. A terminal's competency matrix should therefore identify the source of every requirement. This makes audits easier and, more importantly, prevents workers from being assigned to tasks simply because they hold a broadly related qualification. Internal requirements can and should be stricter than the minimum legal baseline where the terminal's risk assessment warrants it. Reference: EUR-Lex – Directive 2009/104/EC

Back to top ˄

How should certification requirements change when new cargo-handling technology is introduced?

New technology should trigger a review of existing qualifications, training requirements and competency assessments. The ILO specifically recognises vocational training and retraining of port workers in response to changing cargo-handling technology. Its current Portworker Development Programme also identifies the development of advanced cargo-handling methods as a reason for systematic workforce training. In practical terms, a new automated crane, remote-control system or digital workflow may leave an existing certificate technically intact while making parts of the original training insufficient. The terminal should determine whether workers need conversion training, additional certification, revised assessment criteria or entirely new competencies. This should happen before the technology enters normal operation, not after problems appear. The principle is straightforward: technology changes the work, so the competency requirements must change with it. Workforce development should be part of the technology implementation plan rather than an afterthought. Reference: ILO – Portworker Development Programme

Back to top ˄

How can a terminal ensure that its training programme remains effective rather than becoming a compliance exercise?

The strongest training systems measure whether training actually produces competent performance. HSE recommends that training be validated, evaluated and recorded, while competence-assurance systems should consider normal work as well as infrequent, complex and emergency situations. Terminals should therefore look beyond attendance figures and certificate counts. Useful indicators include assessment pass rates, recurring competency gaps, incidents and near misses involving trained workers, performance observations, reassessment results and the time required to achieve independent competence. Training content should also be reviewed after equipment changes, incidents and operational changes. The ILO's competency-based training framework is designed around skills development and measurable learning outcomes rather than training as an end in itself. A mature terminal treats training as a continuous competence-management process: identify the required capability, train it, assess it, monitor it, refresh it and improve the programme when evidence shows that it is not delivering the required standard. Reference: HSE – Training and competence: human factors 

Back to top ˄

Terminal Tracker

Create plans for the next day or week quickly with Terminal Tracker. Seamless TOS integration enables operations planning based on ship size and deadlines without conventional complexity. Work with assets available for specific tasks at given times. When unforeseen changes happen, adapt your operational plan immediately. The Terminal Tracker planning module guides you through the process quickly and easily. 

Terminal Tracker by Identec Solutions  


 

Simulator and On-the-Job Training

Why are simulators useful for container-terminal training?

Simulators allow workers to practise equipment operation and decision-making without exposing people, cargo or equipment to the consequences of real-world mistakes. This is particularly valuable for cranes and other expensive or safety-critical equipment, where certain situations are difficult or dangerous to reproduce during normal operations. A simulator can reproduce normal tasks as well as faults, poor visibility, unusual loads, equipment failures and other abnormal conditions. It also allows instructors to repeat the same scenario and compare performance objectively. The ILO's Portworker Development Programme includes simulation-based training among the methods that can support portworker competence, while research into crane-operation training has demonstrated the value of simulators for developing operator skills. Simulators should not replace practical workplace experience, however. Their greatest value is as part of a broader training pathway combining theory, simulation, supervised operation and competency assessment. Reference: ILO – Portworker Development Programme

Back to top ˄

Which container-terminal roles can benefit most from simulator training?

Simulator training is particularly valuable for roles where mistakes are costly, equipment is expensive, or unusual situations are difficult to practise safely. Quay crane and yard crane operators are obvious examples, but simulation can also support remote operators, control-room staff, planners and supervisors. For operators, the simulator can reproduce equipment behaviour and handling tasks. For control-room personnel, it can create scenarios involving multiple simultaneous events, equipment failures or operational disruptions. The underlying principle is that simulation should reflect the decisions and skills required by the role. The ILO's training approach supports the use of different learning methods according to the competencies being developed, while its container-terminal programme covers operational, supervisory and performance-related skills. Simulation is therefore not simply a technology for training crane drivers; it can be a controlled environment for practising complex terminal decisions before workers encounter them in live operations. Reference: ILO – Portworker Development Programme

Back to top ˄

What should a crane simulator training programme actually practise?

A useful simulator programme should reproduce the tasks, operating conditions and decisions that matter in the real job. This includes routine container handling, positioning, visibility limitations, coordination with other activities and appropriate responses to alarms or abnormal conditions. Training should progress from basic control familiarisation towards more demanding scenarios rather than immediately placing inexperienced operators into complex situations. Simulator sessions should also have defined learning objectives and measurable performance criteria. Research published through the World Maritime University has examined simulator-based training for container-crane operators and highlights the importance of structured training and performance evaluation. The simulator should therefore be treated as a training environment, not a video game or simple equipment demonstration. Its value comes from deliberately creating situations that develop specific competencies, allowing the instructor to observe performance, provide feedback and repeat the exercise until the required standard is reached. Reference: World Maritime University – Simulator-based training research

Back to top ˄

Can simulators safely reproduce abnormal and emergency situations?

Yes, and this is one of their strongest advantages. A simulator can expose trainees to equipment faults, unexpected obstacles, communication failures, poor visibility and other abnormal conditions without creating the physical consequences associated with practising such events on live equipment. This allows instructors to test whether a worker recognises the situation, takes the correct immediate action and escalates appropriately. The ILO's port training guidance emphasises the importance of preparing workers for safe responses to hazards and emergencies, while simulation research has explored its use for developing operator competence under realistic conditions. However, scenarios should be carefully designed. If they are excessively dramatic or unrealistic, trainees may learn the wrong responses. The best exercises are operationally credible, progressively more difficult and directly connected to the terminal's procedures and risk profile. Reference: ILO – Safety and health in ports, Revised 2016

Back to top ˄

What is the right balance between simulator training and live equipment training?

Neither should be treated as a substitute for the other. Simulation is particularly effective for developing basic controls, repetition, abnormal situations and decision-making without operational risk. Live equipment training is essential for developing physical familiarity with the actual machine, the terminal environment, real distances, visibility conditions, noise, communication and operational pressures. HSE guidance on work-equipment competence makes clear that training needs to be appropriate to the equipment and actual working conditions. A sensible pathway is therefore to use classroom or digital instruction first, followed by simulator practice where appropriate, then supervised operation on the actual equipment and finally formal competency assessment. The exact balance should depend on the equipment, risk and worker experience. For a highly experienced operator transitioning to a new control system, simulation may be particularly valuable before live operation; for a completely new operator, it should be combined with substantial supervised workplace practice. Reference: HSE – Training and competence

Back to top ˄

What is on-the-job training in a container terminal?

On-the-job training means learning and developing competence while performing actual work under appropriate supervision. It allows employees to connect theoretical knowledge with the real terminal environment, equipment, procedures and operational pressures. For a new equipment operator, this could involve starting with observation, progressing to controlled tasks and gradually taking responsibility for more complex operations. For a planner, it could mean working alongside an experienced planner before independently managing planning activities. HSE recognises supervised practical training as an important method for developing competence with work equipment. The ILO's portworker training framework likewise combines formal learning with practical workplace development. Effective on-the-job training should not mean simply putting a trainee next to an experienced employee and hoping they learn by watching. It needs defined objectives, an appropriately competent trainer, progressive responsibility, observation and feedback, and a final assessment before independent work is authorised. Reference: HSE – Training and competence

Back to top ˄

What is the role of a mentor during on-the-job training?

A mentor provides continuity between formal instruction and independent performance. The mentor demonstrates correct working methods, explains why procedures exist, observes the trainee, answers questions and provides immediate feedback. In a container terminal, an experienced mentor can also teach practical judgement that is difficult to capture completely in written procedures, such as recognising developing operational conflicts or knowing when an apparently minor problem should be escalated. However, mentoring should be structured. HSE guidance emphasises that people providing training must themselves have sufficient competence and experience. A mentor should therefore be selected based on both technical ability and the ability to communicate and coach effectively. The trainee should also have clearly defined boundaries: which tasks can be performed, which require direct supervision and which remain off-limits until formal assessment. Mentoring works best when it supplements, rather than replaces, a documented training and competency programme. Reference: HSE – Training and competence

Back to top ˄

How should supervised operation progress from beginner to independent operator?

Supervised operation should follow a gradual increase in responsibility. A trainee might first observe the task, then practise individual elements, perform routine tasks under close supervision, handle increasingly complex situations and eventually operate independently subject to formal authorisation. The progression should be based on demonstrated competence rather than simply completing a fixed number of hours. HSE guidance states that competence involves knowledge, skill and experience and that training should be appropriate to the equipment and task. This means two trainees may require different amounts of supervised practice before reaching the same standard. Supervisors should record progress against defined competencies rather than relying on informal impressions. The final step should be a formal assessment that confirms the worker can perform safely and consistently without direct supervision. If performance deteriorates during training, the progression should pause and additional instruction or practice should be provided. Reference: HSE – What is competence?

Back to top ˄

Should trainees be assessed by the same person who trained them?

They can be, provided that the trainer has the required competence and assessment capability and the terminal's procedures permit this arrangement. HSE guidance recognises that competent in-house personnel can provide training and assessment when they possess the necessary knowledge, skills and experience. However, for safety-critical roles, independent assessment can provide additional assurance and reduce the risk of trainers becoming overly familiar with a trainee's performance. Whatever model is used, the assessment criteria should be established in advance and applied consistently. The assessor should evaluate actual performance against defined standards rather than relying on familiarity with the trainee. For complex terminal roles, a useful approach can be to have the mentor provide day-to-day coaching while a designated assessor conducts the final competency assessment. This preserves the coaching relationship while providing a clearer distinction between helping someone learn and formally confirming that they are competent. Reference: HSE – Training and competence

Back to top ˄

How many hours of simulator training should a crane operator complete?

There is no single number of simulator hours that is universally appropriate for every container terminal. The required amount depends on the equipment, trainee experience, simulator capability, task complexity and the competence standard being sought. A fixed number of hours can provide useful structure, but it should not become a substitute for demonstrating competence. The ILO's competency-based training approach supports defining learning outcomes and assessing whether they have been achieved rather than relying exclusively on attendance or time spent in training. Simulator sessions should therefore be long enough to provide meaningful practice and repeated exposure to relevant scenarios, with progression based on performance. A trainee who reaches the required standard quickly should not necessarily need unnecessary additional hours, while a trainee who continues to make safety-critical errors should not be considered competent simply because they have completed the scheduled duration. Reference: ILO – Guidelines on training in the port sector

Back to top ˄

How can simulator performance be measured objectively?

Simulator performance should be evaluated against predefined criteria linked directly to the competencies required in the real job. Possible measures include handling accuracy, control smoothness, adherence to procedures, response to alarms, reaction to abnormal conditions, safety-related decisions and completion of tasks within an appropriate operational timeframe. The assessment should not focus solely on speed because maximising moves can encourage unsafe behaviour. Research into simulator-based container-crane training has examined objective performance measurement and the use of simulator exercises to evaluate operator skills. The ILO's competency-based approach also emphasises assessment against defined learning outcomes. A good simulator programme therefore produces more than a score: it should show which competencies have been achieved and where further development is needed. Instructors can then use the results to tailor subsequent exercises instead of giving every trainee the same generic simulator programme. Reference: World Maritime University – Simulator-based training research

Back to top ˄

Can simulator training help experienced operators, or is it mainly for beginners?

Simulators can be valuable for experienced operators as well as beginners. For new employees, they provide a safe environment for developing basic control and handling skills. For experienced operators, simulation can be used to practise unusual situations, new equipment, revised procedures, automation transitions and emergency scenarios without disrupting live operations. It can also provide a controlled environment for identifying declining skills or evaluating whether an experienced worker has adapted adequately to a new control system. The ILO's training guidance recognises the need for continuing skills development as technology and working methods evolve. HSE similarly states that changes in equipment or systems of work may require additional training. This makes simulation particularly useful during technology transitions. An experienced operator may already possess excellent operational judgement, but still need to practise new interfaces or automated workflows before being expected to perform independently on the upgraded system. Reference: ILO – Guidelines on training in the port sector

Back to top ˄

How can simulation support the transition to remote or automated crane operation?

Simulation can allow operators to learn new control interfaces and practise remote-operation scenarios before they work on live automated equipment. Instead of focusing exclusively on direct manipulation of a crane, training can emphasise monitoring, interpreting system status, responding to alarms, handling exceptions and deciding when human intervention is necessary. This is particularly useful because automation changes the operator's task profile. The ILO's training guidance identifies technological development and advanced cargo-handling methods as drivers for new workforce skills. Simulator environments can reproduce the new workflow while allowing instructors to introduce controlled failures and unusual situations. The transition should still include practical training on the actual system, because the simulator cannot perfectly reproduce every workplace condition. Used correctly, however, simulation can shorten the learning curve and allow operators to encounter difficult scenarios before they encounter them in live operations. Reference: ILO – Guidelines on training in the port sector

Back to top ˄

What practical exercises should be included in on-the-job training?

Practical exercises should reflect the tasks the employee will actually perform and should progress from simple, predictable situations towards realistic operational complexity. For equipment operators, this can include positioning, container handling, coordination with other equipment, responding to alarms and dealing with defined abnormal situations. For planners and control-room staff, exercises can involve changing priorities, equipment unavailability, conflicting information and operational disruptions. The ILO's container-terminal programme covers practical areas including ship loading and discharge, yard operations, receipt and delivery and performance measurement, providing a useful basis for constructing role-specific exercises. HSE also stresses that training must be appropriate to the equipment, task and workplace. Exercises should therefore be based on the terminal's own procedures and risk profile rather than generic scenarios. Each exercise should have a clear objective, an instructor or mentor, defined success criteria and a feedback process so that mistakes become learning opportunities rather than simply failures. Reference: ILO – Portworker Development Programme

Back to top ˄

How should simulator and on-the-job training be integrated into one competency pathway?

The strongest approach treats simulation and workplace training as complementary stages of the same competency pathway. Theory introduces the principles and procedures; simulation provides controlled practice; supervised operation develops real-world experience; and formal assessment confirms competence. The results from each stage should inform the next. For example, a trainee who struggles with a particular crane-control task in the simulator can receive additional practice before moving to live equipment. During on-the-job training, the mentor can then concentrate on transferring that skill to the actual operating environment. HSE's competence guidance supports combining training, knowledge, skills and experience rather than treating one training method as sufficient. The ILO's competency-based approach similarly focuses on achieving defined learning outcomes. A terminal should therefore design simulator sessions, practical exercises, mentoring and assessments as connected parts of one programme rather than as separate training activities managed independently. Reference: HSE – What is competence?

Back to top ˄

How can mentoring and supervised operation help retain experienced workers' knowledge?

Experienced employees possess practical knowledge that is often difficult to capture in manuals or formal procedures. Structured mentoring provides a way to transfer this knowledge to newer employees while also reinforcing the experienced worker's own understanding of safe and effective practices. The mentor can explain why a procedure matters, point out developing hazards and demonstrate how experienced personnel recognise situations before they become serious problems. However, knowledge transfer should not become the transfer of informal shortcuts. HSE's competence guidance stresses that training must provide the knowledge and skills necessary to perform work safely, so mentors need to model the approved method rather than personal workarounds. Terminals can strengthen this process by selecting experienced employees deliberately, training them as workplace coaches and giving them clear mentoring objectives. This turns accumulated operational experience into an organisational capability rather than allowing valuable knowledge to disappear when experienced workers retire or move on. Reference: HSE – Training and competence

Back to top ˄

How should a terminal know when a trainee is ready for independent operation?

A trainee is ready when they can consistently demonstrate the required competencies under realistic operating conditions and have successfully completed the terminal's formal assessment and authorisation process. The decision should not be based solely on training hours, simulator scores or a mentor's general impression. HSE defines competence in terms of the knowledge, skills and experience needed to perform a task safely and appropriately, while the ILO's competency-based training model focuses on demonstrating defined learning outcomes. For safety-critical terminal equipment, the assessment should cover normal operations as well as relevant abnormal situations and should confirm that the trainee knows when to stop, seek assistance or escalate a problem. Once the standard has been demonstrated, the authorisation should be recorded. If competence has not been demonstrated, the correct response is additional targeted training and supervised practice—not independent operation simply because the planned training period has ended. Reference: HSE – What is competence? 

Back to top ˄

Terminal Tracker

Enable semi-automation with Terminal Tracker's position detection system (PDS). Real-time location data improves processes like automated handover between cranes and CHE. Automated job promotion improves accuracy, safety and turnaround time by identifying trucks automatically. Twist-lock control prevents unplanned moves, eliminating lost containers. Control terminal access, zones and vehicles—all within one system based on your operational plan.  

Terminal Tracker by Identec Solutions  


 

Industry Knowledge Hub - Logistics

Technology & Digital Systems: Terminal Operating Systems (TOS) | Yard Optimisation Algorithms| Reefer Yard Optimisation | OCR, RFID, and IoT Sensor Integration | Digital Twins and Simulation Tools | Predictive Maintenance Systems | Refrigeration and Airflow Systems | Power Supply and Electrical Systems | Reefer Standards, Compliance, and Certification | Predictive Maintenance for Reefers |

Operations & Processes: Vessel Operations | Yard Operations | Gate Operations | Rail and Barge Integration | Transhipment vs. Import/Export Processes | Exception Handling | Chronology of the Cold Chain | Initial Reefer Cargo Conditioning | Pre-Cooling | Reefer Handling at Terminals | Reefer Energy Efficiency and Power Optimisation | Empty Reefer and Return Operations | Reefer Stowage Planning on Vessels | Reefer Flow Management at Terminals |

Equipment, Maintenance & Asset Management: Container Types | Reefer Container Types | Container Identification and Coding | Container Standards and Regulations | Container Handling Equipment (CHE) | Preventive vs. predictive maintenance strategies | Reefer Maintenance, Lifecycle, and Reliability |

Transport & Modalities: Overview of Refrigerated Transport | Reefer Vessels and Maritime Operations | Reefer Stowage | Intermodal and Inland Reefer Transport | Trade Routes and Global Flows | Cold Corridor and Regional Infrastructure | Reefer Flow Management and Balancing |

Reefer Monitoring: Reefer Monitoring Systems and Infrastructure | Reefer Parameters and Data Collection | Reefer Alarm Management and Response | Reefer Data Management and Analytics | 

Planning, Optimisation & KPIs: Berth planning and vessel scheduling | Yard planning and Block Allocation | Equipment dispatching strategies | Labour planning and shift optimisation | Peak handling and congestion management | KPI frameworks | Reefer Performance and KPI Measurement |

Cargo & Commodity Handling: Dry General Cargo (Standard Containers) | Dangerous Goods (DG) | Dangerous Goods in Reefers | Out-of-Gauge (OOG) and Project Cargo | Tank Containers | Bulk-in-Container Cargo | High-Value and Sensitive Cargo | Empty Containers | Damaged Cargo and Exception Handling | Reefer Cargo Categories and Industry Applications | Reefer Cargo Preparation and Pre-Loading | Packaging and Protection Technologies | Dangerous and Sensitive Goods Handling in the Cold Chain |

Sustainability & Environmental Impact: Energy Consumption and Electrification | Shore Power (Cold Ironing) | Emissions Tracking | Alternative Fuels | Yard design for reduced travel distances | Waste management and recycling | Sustainable infrastructure development | Energy Efficiency and Power Optimisation in Reefer Handling | Refrigerants and Cooling Sustainability | Carbon Footprint and Emission Tracking | Packaging and Waste Reduction in the Cold Chain | Reefer Infrastructure Efficiency and Green Design |

Safety: Pre-operational safety checks (POSC) | Terminal Equipment safety systems | Personnel safety procedures | Incident reporting and analysis | Safety KPIs and compliance | Training and certification programmes | Risk assessments and hazard identification | Reefer Operational and Equipment Safety | Reefer Cargo Handling and Physical Safety | Chemical and Refrigerant Safety | Training and Continuous Improvement in Reefer Handling |

Human Factors & Organisation: Workforce Skills and Training | Reefer Skills and Training | Change Management | Control Room Operations | Cross-Department Coordination |

Risk Management: Financial Risks | Operational Risks | Strategic Risks | Risk Identification Framework | Operational and Process Risks in Reefer Handling |

Claim Handling: Claim Types | Container Claim Handling Processes | Claim Handling Stakeholders |  Reefer Claim Handling |